...5 prior to installation, make sure the ignition switch is in the lock position 6 connect the accuating rod to the switch 7 press switch into position and install screws 8 install steering column ...
...actuator rod broke. Repairman fixed it and it broke again. Started it by junping the solenoid. Now I can't cut the power off. Temporary fix so I can get the switch fixed? I have an '86, and the ...
...actuator rod move but the problem remains. The actuator rod has a spring and block the returns the actuator to its normal position. Sounds like one of the three parts are broke. If this is a tilt ...
...actuator rod from the switch and remove the switch. To install: When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in the LOCK ...
ignition key What axactly is an Actuator Pin? Is it the thin (metal/plastic) rod that connect key to ignition switch...can someone confirm.... Yes, the rod is the actuator.
Question about Chevrolet Suburban
actuator rod 1989 cadillac seville I have removed steering wheel and lock cylinder and ignition switch, the rod to the ignition switch was disconnected from whatever it was supposed to be connected to
Question about Hyundai Cars & Trucks
...cylinder to the ignition switch on a 2003 Hyundai Santa Fe? Also, do you know how I can get a new one? It broke. Ignition switch actuator rod. Dealer should have in stock or be able to order it for ...
...actuator rod from the switch and remove the switch. To install: > When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in the LOCK ...
rod. Unfasten the two ignition-switch mounting bolts using a wrench or ratchet and socket. Slide the ignition switch off the actuating rod and remove it from the steering column. Installing the Switch
Question about Chrysler Cars & Trucks
...actuator rod connect to ignition switch on 1986 chrysler fifth avenue? There is an ignition key and lock tumbler on the right side of the steering column. Then the electrical switch is mounted on top ...
425 questions posted
Usually answered in minutes!
550 Questions
469 Questions
461 Questions
355 Questions
338 Questions
