...gear shifting lever doesn't work in 2001 Ford Mustang. Transmission seems to be fine; if I could manage to put the shifting lever in the ''D'' position, the car drives with no problem. The problem, I ...
...shift out of park to drive. It doesn't matter how hard you press the brake or the shifter handle button. You have to play with it to finally get it in gear. Any ideas? Is there an adjustment or a ...
Can not move the gear shift to park Shifter cable needs replacement or adjustment or shifter release button is seized.
...gear shift. It lock in park detemp ball/button could be broke check the brake linkage/switch to the trans if not any of those block the tires start it and have someone get in and hold the brake then ...
Question about Ford Mustang
...gear by rotating the converter. With the converter properly installed, place the transmission on the jack. Secure the transmission to the jack with a chain. Rotate the converter until the studs and ...
Question about Ford Mustang
...to find the problem.. It may not need a starter. And if this is a STICK-SHIFT there are safety concerns because testing is done in Neutral. Do not jump anything electrical with a stick-shift in
Question about Chrysler Cars & Trucks
...gear shifts. Consider checking or replacing the TCM. Shift Linkage or Cable Issues: Damaged or worn shift linkage or cables can also cause gear shifting problems. These components connect the gear ...
Question about Ford Mustang
...gear shift control cable on a 2008 Jeep Commander, you will need to: Locate the cable by following it from the gear shift lever to the transmission. Remove the cable from the transmission by ...
...gear shift? I have a 1991 Wolfsburg Jetta automatic and the gear shift is stuck in drive. The shifter moves but doesn't change the transmission. Locate where the shift cable linkage mount to trans, ...
Question about Ford Mustang
...gear link machanism. I suspect that it will be in the shift mechanism If it is a cable shift then replace the cable If it levers or other linkages check and adjust or lubricate as required I doubt it ...
547 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions