2004 Pontiac Montana "remove door panel" Questions

Ad

Question about Pontiac Montana

2 Answers

remove to door panel On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining

Ad

remove door panel to replace window motor ALL DOOR PANELS HAVE PUSH CLIPS INSIDE THEM! YOU'LL NEED TO USE A FLAT PRY BAR, OR SCREWDRIVER, PLACE IT IN BETWEEN THE DOOR PANEL, AND FRAME! AND TWIST IT TO

Ad

Question about Pontiac Montana

2 Answers

door panel. you must remove 2 screw in under the door "arm rest" (they're toward the front) you MUST remove the metal clip behind the window crank (those with pwr w/l dont have to worry about this

...bent screw driver to pry & pop off from there unplug harness connectors to panel & remove panel pull plastic dorn in front of door you should have 3 10mm head nuts on mirror studs good ...

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.

Question about Pontiac Montana

1 Answer

...housing... You'll need to remove the door panel in order to remove the panel that's right beside the mirror on the inside of the door and remove the 3 bolts holding the mirror down assembly

Question about Pontiac Montana

1 Answer

...remove must slide it off of door handle Slide control switch panel down through hole you popped it out of Pull vapor barrier loose bottom right side to expose coiled spring and window motor Tape ...

...door and the dash meet, there is a panel that comes off and underneath is the fuse box. So pull that #1 fuse out. Keep the windows open as a safety measure, then, Remove the ignition key from the ...

Question about Pontiac Montana

1 Answer

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.

Question about Pontiac Montana

1 Answer

remove the door panel. First remove the switch plate by prying upward at the rear of the switch plate and unhook the connectors. Then remove the two armrest screws. The door panel then has to be pryed

Not finding what you are looking for?
2004 Pontiac Montana Logo

575 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...