...the emergency flashers are engaged. Fuse in the fuse box is ok. I checked everyone. check the brake switch. It sits above your brake pedal. Just follow the brake pedal arm up and you can't miss
...brake pedal with the lights off you are turning on you parking light side of you bulb, when the lights are on the parking light is already lit up so when you push the pedal you see no change. try a ...
...brake pedal,then it will eventually stop Check the power booster in the braking system. You may also have air in your brake lines and this will need to be bled out by a competent mechanic. If the ...
brake light wont work, bulbs and fuse is good 1995 jeep wrangler Check the brake light switch on the brake pedal
1991 jeep cherokee brake lights wont work at all Check fuses and brake light switcvh (generally located top back side brake pedal). Also wires.Hope helps.
...brake light switch is connected as far as i can tell. I am thinking that is it possibly a bad ground. Does anyone know how i should go about checking this? Review the pedal switch and help you with ...
...brake pedal hold the pressure on the brake pedal when opening the bleeder then push the brake pedal to the floor keep it there, until you tightened the bleeder, then pump the brakes up and hold it ...
Question about Pontiac Sunfire
...figured it out brake pedal switch, have a look under the dashboard behind the brake pedal, easy and cheap to mend. to prove it, pull the wire off and connect together, if lights work its the
...of what youve done ?! unless of course you have applied pressure to the brake pedal which will knock up the auto adjusters (if fitted ?)then the drums wont go on till you reset them. more info ...
Brake Pedal Switch - Brake Pedal Switch harness is open or shorted - Brake Pedal Switch circuit poor electrical connection this will also set the PARK lock out feature do you want do driver a car with
1,003 questions posted
Usually answered in minutes!
987 Questions
731 Questions
699 Questions
696 Questions
688 Questions