1998 Pontiac Grand Am "dim lights work brights" Questions

dim , fog lights dont work I have to 2002 Grand am gt and the headlights seem really dim the brights symbol on the dash stays on wether or not the brights are on and when the brights are turned on the

...brights on the rt and only a dim light on the left when I switch to bright. I have power on the orange wire on the rt side and nothing on the left when i plug the bulb in on the rt I then have power ...

lights work. What else do I try? Have you considered going back to the place that replaced your motor. They surely are responsible for not making things worse. You just asked for a different motor and

...lights don't work - I looked at the fuses but they all seem to be ok . Any ideas.thanks, Diane have you by accident turned down the bright and dim switch near the head light? probably you were ...

...brights. It is time to replace the lights. I have the same car and have changed the headlight swithc three (3) times. To verify disconnect the headlights electrical connectors use a 12V test light or ...

...LIGHTS DIM AND HALF OF RADIO LIGHTS OUT ALL OTHER LIGHTS LIKE THE SPEED AND TEMP R GOOD AND BRIGHT I saw this issue a few times and it was usually a bulb that went out. If it happened after the car ...

...work, my car just died. No warning, nothing. So attempted to restart but just sputtered. Waited for 2 hours and was able to start it to drive it home, where it died upon reaching my driveway. When I ...

...dim lights will not work Dim lights quit working all of a sudden Your circuit lights may be bright or dim according to how your electrical system was set up. It may dim when lights are off and get ...

...lights to dim, my lights will totally turn off, sometimes if I switch back to bright then to dim again, they will work. Sometimes if I wait a second or two they will come on by themselves. Dimmer ...

...bright lights work find, but the dim's do not. I have tried replacing the light element with no change. What could account for dims not working but brights working fine? make sure your dims art ...