1993 Pontiac Grand Prix "neutral safety switch" Questions

...neutral safety switch. You would need to know if you have power on the small wire on the solenoid that comes from the key switch when the switch is in the start position. The neutral safety switch is ...

...neutral safety switch and the shifter linkage it could be causing the neutral safety switch to get a bad reading. After that I'd check the ignition switch itself. I don't remember if the '95 had a ...

...neutral safety switch... this is part of the gear position switch on top of the trans where the shift linkage connects, it is mounted over the selector post that sticks out of the trans. Here is a ...

...neutral safety switch? Is this the only assembly that controls the engine from turning over if everything else seems to be ok. The problem with the car is that is does not want to start but by moving ...

where to find the location and replacement of the Natural safety switch for a 98 grand prix 3.8 the neutral safety switch is on top of the transmission where the shifter cabe attaches

neutral safety switch?. Other question is there other relay switches between ignition and starter. This is getting very aggravating and I want my car back :) Check the neutral safety switch,it is most

...neutral safety switch wires where the harness plugs into the transmission on a 2005 Pontiac Grand Prix. I don't know wh I need to know which color coded wires are for the Neutral Safety Switch on my ...

...Neutral safety switch,AC compressor and Radiator cooling fans all stop working intermittently at the same time. Only happens during cranking. Could it be a bad ignition switch. The cranking position ...

...start unless I move the shifter back and forth from park to drive. could the neutral safety switch be both the causes ? I would say yes. Replacing the nuetral safety switch should correct both

...neutral safety switch cause the fuse for all of the gauges to blow? Fuse 39 (10A) or the I/P Electronics Ignition Feed continues to blow. It has blown after I shift gears and recently while turning ...