1998 Nissan Sentra "vtc sensor" Questions

...Some have had success with applying lube to this part, while others have had to replace it. The VTC solenoid valve is part of the Valve Timing Control System. The purpose of the system is to ...

...vtc sensor is either contaminated or stuck OR update the SCM/PCM which would involve me driving 10 hours to the nearest acura dealership, i replaced the sensor but yet still the check engine light, ...

...It could be a broken wire possibly. Possible causes - Engine oil level - Dirty engine oil - Check VTC Strainer for blockage - Faulty VTC Oil Control Solenoid or circuit - Faulty VTC Actuator - ...

sensor noise goes away but still won't idle There are several possible causes and the one that you should check first is the service bulletin on the issue. There is a software update for that car, the

sensor and VTC solenoid electrical connectors Disconnect the Crankshaft Position (CKP) sensor connector (1) and Variable Valve Timing Control (VTC) oil control solenoid valve connector (2). Remove the

...Sensor circuit poor electrical connection - Faulty starter motor - Starting system circuit - Dead (Weak) battery 341s never lie, if one pulse in 10 fails, Bam. not posting cars symtoms first make me ...

...murano,and it has an error on (VTC P0021),what should I do? Possible Cause: Crankshaft position sensor Camshaft position sensor Accumulation of debris to the signal pick-up portion of the

...will not rev past 5000rpm on the road have tried fuel pressure different sensors even changed vtc and vtec actuators, disconnected exhaust even checked intake all ok, tried different ecu but no ...

...vtc solenoid anywhere to buy and some sites say it doesn't have one and on ebay there are 0 results found am i asking for the wrong part? i need the sensor with the plunger in it What's

code p0011 on Honda accord 2.4 check engine light on Honda accord something to do whit trans sensor This is a VTC code-variable timing control