1997 Nissan Pickup "replace clutch cable 1995" Questions

replacing clutch cable clutch seems to be slipping This model uses an hydraulic clutch and it is self adjusting, a slipping clutch means the clutch pressure plate and disk are worn out.

...clutch ( if the system has been bled correctly or cable fitted correctly ) then the problem is that the clutch plate is in the wrong way round and the clutch hub with the springs is hitting on the ...

Son just replaced master clutch cylinder, and now emergency brake dosent work clutch and brake are not related. cable adjustment may be needed to tighten'em up.

...the problem. The truck just wont start! thanks for your help! I had the exact same problem, I replaced the starter, it worked a couple more times and then nothing. I completely checked the ...

...but the person wasn't very certain. Any help would be greatly appreciated! check and replace the negative battery to the engine, the starter is grounding through the clutch cable, very

it's just that particular model, hope someone can help, thanks. You might still have a little air in the system, try bleeding it one more time. There isn't any adjustment like on a cable clutch system

...clutch cable(although moving the fork) is not in very good shape and needs replacing I'm ruling it out as the sole problem i need adjustment instructions thank you. You will need to turn the cable ...

...blocked and holding the pressure plate off slightly if it is a cable clutch then replace the cable if the clutch system is properly releasing and engaging the clutch then the fix is a new clutch ...

...from above, once this is done tranny removel is pretty straightforward, Always replace main seal and clutch cable as the cable especially prone to failure. I would ck cable first, is pedal on

...clutch cable insulation. If there is any damage to the insulation replace the cable. This cable has an automatic tension system for proper clutch pedal clearance. On my 97 900se I replaced the clutch ...