1997 Nissan Pathfinder "front wishbone" Questions

Ad

...starts to roll and shimmy left to right. we have replaced the rear shocks ,front struds,and installed new tires if its got front wishbones change the bushes or the hole wishbone which ever is ...

Ad

Question about Nissan Pathfinder

1 Answer

...front brake pads to a 2005 Nissan Pathfinder, I had a wishbone type metal spring come off. I don't know how to re-install onto the brake pads? Any advice? You have to insert them in the little holes ...

Ad

Question about Nissan Pathfinder

1 Answer

wishbone front offside bmw mini one i have removed the 2 nuts holding it on but i cannot pull it out of the bush. do i need a tool I have removed all of the nuts and the ball joints but cannot pull ...

Question about Nissan Pathfinder

1 Answer

...front? and how do you do it? Hi there! Awkward rather than difficult I would say. You need Axle stands, & spring compressors, & a bar & chain, as well as usual ratchets and spanners . Method - Jack & ...

Question about Nissan Pathfinder

1 Answer

...wishbone is bent on front right side, the transaxel is ok and so is the strut. Also shows "service engine soon", "trac off", and "ABS" when the car is started. How can i repair the wishbone? Am i ...

...front ball joint have to be pressed in and do i need the press kit ? The ball joint can be pressed in and out but specialist tools will be needed. You will need to remove the whole Wishbone, (Control ...

grinding or creaking in 2008 ford fusion front end noise appears randomly, but always at slow speeds and when going over bumps, etc. Mr.Mangus  have you checked at all your front suspension ...

Question about Nissan Pathfinder

1 Answer

wishbone bush needs replacing on my 1994 celica 2.0gt auto Not sure if bushing is replaceable but usually when the bushing is worn it is a sign that the front mount is worn, placing excessive load on ...

Question about Nissan Pathfinder

1 Answer

...front wishbone was worn. As such I believe I need to replace the wishbone as the ball joint is joined on with rivets and I dont have a drill. How tough a job is it replacing the wishbone on said car? ...

front bush on the lower wishbone is it a difficult job and how long would you expect it to take If you can get to a press it should not be a big deal,just remove the wishbone and press the old one out

Not finding what you are looking for?
1997 Nissan Pathfinder Logo

896 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...