1991 Nissan Pickup "trash pad" Questions

...air in it.If thay put plastic bleeder hoses and fittings in there for you just throw them in the trash.go to your local parts store and buy steel lines to for it,you may need an adapter for one of ...

2300 rpm at 55mph,service engine light on/ Drove 20 miles and discovered RR caliper stuck. something has clogged the brake line or caliper. Flushing the brake system may fix it. The excessive heat may

...pad out and check whether the piston is retracking as it should. I would suspect the CV axle. But it could also be the caliper that is loose. Either one is not good. have this repaired and stop ...

brake that sticks. but check the rubber hose that runs from the caliper to the hard line. sometimes trash gets caught up in the rubber hose. if it isnt that check your ABS system like im going to do

toyota corolla ae110 brakes binding i have a toyota corolla ae110 and the front right brakes is binding, three is a burning scent and smoke coming from the wheel area and the car losing power due to ...

...pad. When your pads get low, this 'sensor' ( really a small metal tab ) rubs on the brake rotor, making that awful sound. If you wait too long to have the brakes done, you could theoretically trash ...

pulse in back petal yes it was doin the pulse a little before the back pads and rotors were pretty well trashed so i figured that was makin it pulse but know its goin it all the time most of time when

...Bad hub bearings. This is most likely the noise you are hearing. Sounds like you are pulling a trash dumpster behind

1997 Nissan pathfinder se went head on thru a small 10x7 billboard and a metal drum trash barrel at 15mph now I'm dripping antifreeze but not from my radiator....Think it is the reserve tank...also am

it's usually cheaper and easier to buy aftermarket at NAPA auto or other supplier (shop around) and trash the old rotors. If the rotors can be turned then keep them for the next brake job and use them