1991 Nissan 300ZX "size socket needed change rotors" Questions

...socket set, a good size C-clamp, and maybe a screwdriver. Remove the wheel and unbolt the caliper from the hub (two bolts on the backside, I believe 17mm). Remove the brake fluid reservoir cap. Slide ...

...rotors what size wrench or socket do i need to remove the brake caliper bracket on my 1999 ford f-150 so i can change my front rotor? on mine it was a 15mm 15mm I tried several and that one fit

...size. To remove front pads..you need 8mm allen socket to pull the caliper guide pins, then 17 or 18mm..To remove rear pads...you need 13mm socket for lock bolt on guide pins and 15mm open end wrench ...

...size Allen wrench for 2001 escape front caliper? i just changed my front rotors and pads on my 2001 escape, 6 cylinder. everyone was wrong on the wrench sizes, including the idiots at my local ford ...

socket size to use for your brakes can be tricky, because sometimes it can be changed from how it originally was. I discovered that last month when I was trying to change out my brake pads for my 2005

...size allen wrench to remove front brake caliper i just changed my front rotors and pads on my 2001 escape, 6 cylinder. everyone was wrong on the wrench sizes, including the idiots at my local ford ...

...SOCKET THE IS THE SAME SIZE AS THE BEARING'S OUTTER RACE AND A LARGE SOCKET UNDER THE CASEING FOR SUPPORT AND TAP IT OUT.THE LATTER IF THE BEARING IS IN THE CASE THE SEPERATOR,AND MAYBE A PULLER ,IF ...

What size boxes do i need to change rotors on a f150 2011 5.0l 4x4 If not Metric Hex Driver Bit then Metric Wrenches or Sockets Just try the tools you have

...socket for that, not sure what size, but first, see if the rotor will come off with a couple of raps, if it doesn't, the nut has to come off, then just pull the whole thing off, get the outer bearing ...

...size of the nut on a 05 ford escape, on the crank sha i tried to do my brakes and i was going to change my rotors, and i had a 1 1/4 socket and it was to small i ask a part s guy he gave me the deer ...