1991 Nissan 300ZX "ignition coil" Questions

ignition coil isnt getting any juice...so...anyone out there please respond, thank you are u asking y it doesnt get 12 volts input or are u asking y it doesnt fire? if it is receiving voltage, but not

why is my 1986 nissan 300zx not getting any spark? i replaced the cap and rotor and ignition coil Have you checked if any power goes from ignition switch to the coil?

ok, for some odd reason two of my ignition coils dont seem to be getting any power to them, i changed out ever plug with new ones and also new ignition coils, its a 91 TT, im jus as lost trying to ...

...ignition coil connectors and the ignotion coils themselfs, now its seems as two of my ignition coils wont get power to them to create a spark on my sparkplug (of course)...so does anyone know what ...

...ignition coil still wont start. There are 2 wires going into the ignition coil a blue one which has power and a green and white one that for some reason doesnt and should it goes alot of places and i ...

Can't get any fire at the secondary of the coil,even to ground. Tested the coil, it's fine and so is the voltage on the connector pins at 11.75v to the primary of the coil. The voltage is ther

...ignition coil on 1984 Nissan 300ZX? No fire to spark plugs. Will not start normally if you your fuel injectors are triggering most likely your crankcase shaft sensor is okay which also controls the ...

...ignition module offering variable dwell angle and a low quiescent current or a module built into the management ECU. If it is a module or amplifier type it is likely to be sited fairly close to the ...

...ignition coil and plugs what do the plugs look like are they black? - You could just replace the plugs to eliminate these all together as this is cheap. In any case you need to check they are getting ...

...on my 86 300zx please help Having trouble locating the ignition control module on my 86 300Zx plz help thx. I don't believe it has one. The computer sends a signal to the power transistor by the