...clutch is in or out...i drove down the street, put it in neutral, shut off engine & coasted & STILL makes noise...it sounds like a bearing NOT wheel bearing...PLEEEEASE HELP ME!!! throwout ...
...clutch properly with perfect success at the time, only to come back hours later completely empty. So would it be the slave or the master to go first ? I can replace either but i would like to know ...
clutch 1988 nissan stanza 2.2 liter. clutch pedel stays on the floor, master cylinder full of fluid The seals are blown in either the master or slave cylinder. I'd recommend replacing both (it isn't a
...alternator and battery is charged. Sometimes pumping clutch seems to get the car started. I suspect you have burned contacts in the starter solenoid, either replace the solenoid or the entire ...
...clutch start car.When you turn key on dash lights come on cae will not turn over. put in new battery did not help Do you get a fairly loud 'click' when you turn the key to 'start'? If so, you need a ...
...clutch, upper. (Replace) - Worn out clutch cylinder clutch, lower. (Replace). - Worn out clutch plate. (Replace) - Worn out pressure plate. (Replace). - Clutch bearing defective or seized.
...replace a clutch fan on a chevrolet trailblazer how do I replace a fan clutch cable on a chevrolet trailblazer ...
...Replace Clutch Master cylinder honda civic.... replaced with new clutch and clutch kit... now i have to replace the clutch master cylinder..... only done 167k since new clutch.... should this have ...
...master and slave clutch cylinders but clutch still does not work- is there something else i need to look at? if you replace and shure to make a good bleed on clutch fluid, then replace clutch ...
...they replace the clutch plate they should also replace the clutch cover or vice versa. I don't think it's you it's probably just the car. I suggest you have the clutch plate and clutch cover
105 questions posted
Usually answered in minutes!
125 Questions
65 Questions
48 Questions
21 Questions
26 Questions