...brake fluid is below a safe level. Adding some brake fluid to the master cylinder and pumping the brakes a few times should remedy this. If this does not remedy this then you have a leak in the ...
1991 nissan stanza brakes I was pulling out of a parking spot,felt a pop whike compressing the brake pedal and my brakes went to the floor.After getting home 3 blocks later ther was a trail of brake ...
1991 Nissan Pintara U12 brakes don't work I have no brakes. The brake pedal is solid, it wont move at all. I renewed the vacuum check valve to the booster and I have had the master cylinder overhauled
I need to know how to take off the back brake to change the wheel stud You don't need to take the back brake off, just the rear brake drum. It is held in place by the wheel. After removing the wheel, ...
rear brake lights the rear tail lights work but not brakes,the one in the window works they may be dual element bulbs. the element used for the tail lights is ok but the brake light element is burnt. ...
Question about Nissan Stanza
...cotter pin then install the O-ring and dust cap. Install the brake caliper assemblies and bleed brakes if necessary. Install the front
fluid leakage from area by passenger front tire, about 6" in from brakes Rusted brake tubing,hose or caliper Check it out Don't use it, not safe
1991 nissan stanza brakes locking up front brake lock-up Calipurs
Question about Nissan Stanza
rear brake lights don't work on 1996 Oldsmobile Cutlass Supreme The tailights work, and so do the turn signals. The brake light in the rear window also works. The fuse on the passanger side fuse box ...
...the dash, you will be able to see the switch mechanism near the hinge that moves when you touch the brakes. You probably need to close the gap until the brake light stay off when not being used. Make ...
105 questions posted
Usually answered in minutes!
125 Questions
65 Questions
48 Questions
21 Questions
26 Questions