1988 Nissan Pathfinder "broken spark plug extractor" Questions

...broken spark plug and i have broke 2 sockets already. please help. Chances are the extractor is too small for the size of the spark plug. The EZOUT or extractor should be large enough to grip both ...

broken spark plug ok so i have a broken spark plug that broke off after the nut, it is almost a part of the truck it is so rusted in there. i have a screw extractor, i have a million extensions but it

Broken Sparkplug Ford -150 5.4.How do I remove shank? you have to use a spark plug wrench to get the rest of the spark plug out. It will be very difficult to get to from the top,You MAY be able to use

broken plug top with grease to catch any swarf when you use the drill Clean up the area and then apply some heat to the block area not the plug give it a few minutes and then try the extractor If that

spark plug is broken, the only part left in the head in the sleave with the threads, it broke off even the nut part that the scocket fits on to remove it. I would try to spray some penetrating oil on ...

...spark plugs and cables on a 2007 Ford F-150 V8 4.6 engine? I understand it is about $400 just to do the plugs. The cables are now the coil on plug type and may not require replacement. This job is ...

...drill had changed position. I recently had to do exhaust bolts (6) and a spark plug that had rusted and broken off inside the motor, just the threaded portion of the spark plug was all that was

broken spark plug. How do I repair it? Spark plugs are not repairable. You replace. them. If the hex,is still in the spark plug hole,just unscrew it,and replace with a new one,if the hex is gone,use a

...can do to remove this problem. Would a stud extractor work or a tap? I don't have alot of money to take it to a shop? Use Irwin bolt grabber and liquid wrench. It will extract your broken spark ...