1987 Nissan Pulsar "truck turn signal" Questions

location for 1985 nissan pulser signal flasher Turn on the four way flasher and listen for it under the dash.Usually located under the dash close to the steering column

That FAST BLiNKiNG means one of the bulb in the right signal light is BUSTED and needs to replace, turn on your HAZZARD switch and look at the right side and inspect what bulb is malfunctioning! Taaah

Turn the ignition switch to the OFF position. Using an ohmmeter, check the CMP sensor ground circuit, by connecting the meter between a known good engine ground and terminal: E16i engine- terminal D .

...turn the screwdriver fully counterclockwise. The red LED and green LED perform different functions in different modes. Mode I- This is the normal vehicle operating mode. The green LED will indicate ...

1987 Pulsar Electrical I took my car apart to redo all the interior and when I re-installed the dash my rpm gauge stopped working, a few lights will not come on (high beam light, Door open etc..) and ...

...now but left turn sign on truck doesn't work now. It blinks fast like a bad bulb but bulb is OK, fuse OK, any suggestions, Thanks You need to replace the turn signal flasher with a heavy duty

...truck is first started the turn signals will work fine. After 5 or 10 minutes of driving the turn signal will stop working. The interior indicator will stay solid as will the exterior turn signal ...

...brake light come on and stay on. If I turn the right turn signal on then the hazard lights(both sides) and the right rear brake light flashes. lol sounds like my old truck most likely crossed ...

...turn signal switch. The turn signal switch receives battery voltage at all times through the HAZARD SWITCH Fuse. When the hazard switch is placed in the HAZARD position, battery voltage is applied to ...

...truck turn signals don't work; my toyota 92 pickup truck turn signals suddenly don't work; but the hazard flashers work; and the headlights work could it be a fuse problem with the turn signals: or ...