1987 Nissan 300ZX "change plug wires" Questions

...the block and it didnt spark does anyone know what the problem would be. do you have coil over plug or one coil? if you have spark plug wires, swap one with the cylinder in question. swap an

...plug wires will do just that You have two wires inverted causing the bad miss Plugs may have been dropped at the store, I see this all the time. The insulators get cracked and you can't really see, ...

300zx no fire to #2 spark plug 1990 model. change out coil and spark plug. go same results. rotor distributor cap and plug wires will solve the problem if not you have a bad injector

...plug wires for leakage. One trick to doing that is to start your car at night or in a dark garage and look to see if you can see any spark emitting from the wires. Also check the spark plug boot for ...

...all. I had a 300zxtt motor with worn rings( blows dipstick out of the engine) and i pulled it out, changed over all the wiring as the old harness from the origional motor still works so i removed it ...

...your money on a fuel pump until it's the last option where can I find out how to change plugs and wires of my 87 nissan 300zx turbo? I have never worked on a car and would like to try.l know

...plug wire resistance, cap, rotor, distributor vacuum units and then test the spark power. Why change the fuel pressure regulator unless you know it is faulty and you can't know that unless you have ...

MY 1990 300ZX IS MISSING ITS GOT FIRE TO ALL PLUGS HOW DO I CHANGE FUEL INJECTERS Check your wiring to all coil packs, they are know to have connection problems.

HC's are way high, in 700's I've changed everything I can ran premium fuel, additives to guarantee (didn't work) I'm at a loss Help! try a tune up- plugs and wires ,and pcv ...

change spark plugs. cant get them out of my 1990 nissan skyline rb20 somethings conected to them all thats in the way Sounds like what you are describing is the rail that holds all the plug wires nice