1986 Nissan 300ZX "cruise control contact under brake" Questions

...cruise control. There is a plastic plug that needs to be in place to turn off the brake lights. They should be available at any dealer - there is also one for the clutch pedal arm in manual trans. ...

...cruise control only works after vehicle is started five or six times. Do you know how it works ? What controls it ? Did you hook up a scan tool an check for DTC'S - diagnostic trouble codes ? Cruise ...

...cruise control kick off why dos the cruise contrl kick off There is a brake swith on the front of the brake pedal under the dash........mine wore out at about 190k.......looses contact and cruise ...

Cruise control stopped responding. Brake lights are working. What do I do to fix the problem? It could be something a simple as the cruise control switch(s)... or it could be the Cruise Control Module

cruise control not working I just fixed my Cruise control problem. It didn't work at all, no light in the dash either.  What had happened was, I had changed the brake booster some months back

...cruise control won't work the horn could be --horn, relay or contact under the steering wheel cruise controls need :- the brake switch , clutch switch cruise control switch, VSS sensor , engine rpms ...

...cruise control not working 2000 grand marquis cruise control not workin. Fuses seem ok Have seen this problem before. You need to look under dash at brake pedal and find a blue switch with plunger ...

cruise control isn't working just had the same problem... also noticed that my rear brake lights didn't work... sounds like two separate problems but as I did more research, found that both function ...

...cruise control will not set. 2008 Altima 2.5s My cruise control will not set. I can turn it on/off and the cruise light will turn on and off in the dash, but I cannot set the cruise. I recently ...

Cruise control has quit and break lights stay lit Brake light switch is dropping the cruise control. adjust the brake light switch at the brake pedal arm under the dash. The plunger on the switch must