1989 Mercedes-Benz 300-Class "reverse clutch" Questions

Ad

Question about Mercedes-Benz 300-Class

1 Answer

eforward gears work ok? you have problems in the reverse clutch assembly.reverse clutch piston and seal leaking.worn retaining rings.worn internal gears or sun gear.in put carrier.and reaction carrier

Ad

Question about Mercedes-Benz 300-Class

1 Answer

mercedes 300 se no reverse when cold 1/2 mile later when gearbox is warm i have reverse all day Check and make sure that the transmission isn't over or under filled. If not, the clutches that operate ...

Ad

Question about Mercedes-Benz 300-Class

1 Answer

...reverse i am really sorry to give you the bad news but the trans has failed, the problem is the forward/directr drive clutch pack has either lost hydraulic application pressure or the clutches are ...

Question about Mercedes-Benz 300-Class

1 Answer

...reverse clutch hub and the low-reverse one-way clutch assembly. The reverse ring gear hub is splined to the output shaft and to the reverse ring gear. The reverse ring gear hub is laterally held by a ...

...that help it shift. All the forward gears have syncro's so they can kind of tolerate when the clutch isn't right, they will still go into gear. But reverse needs the clutch to work

Question about Mercedes-Benz 300-Class

3 Answers

...reverse then start engine back again. clutch has no slip and still has 1 1/2 free travel at top so dont think clutch is issue. your syncronizer is going out on the reverse you need to have it looked ...

not working properly; 2. The possible reasons why the reverse gear cannot be driven are: the overdrive clutch, overdrive one-way clutch, low reverse brake or direct gear clutch is not working properly

Question about Mercedes-Benz 300-Class

1 Answer

...reverse clutch pack is most likely burned up. You'll need a tranny shop to replace at least the reverse clutches, possibly more depending on the residual damaged caused by the reverse clutches. The ...

...Clutch ? Low/Reverse For component location, refer to Disassembled Views in this section. The low/reverse one-way clutch is a sprag type one-way clutch. The low/reverse one-way clutch holds the ...

Question about Mercedes-Benz 300-Class

1 Answer

...reverse when letting the clutch out. Yes i,m going slow and eazy with a clutch. Thanks Clutch facing is glazed so that is why it hops in reverse. Reverse is the lowest gear which will do just that. ...

Not finding what you are looking for?
Cars & Trucks Logo

326 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...