2005 Chevrolet Uplander "put car reverse nothing happened" Questions

...reverse, tried to put into drive and there was nothing it just looks broke. Check linkage at transmission. Cable end may have popped off ball fitting. Just snap it back on .it will pop off sometimes ...

...car and try to reverse or to drive forward and nothing happened when i put in reverse gear or drive gear the only new rhing is i can see t/ap code Hooking up an ODB2 could give you some transmission ...

...car, put it into reverse but nothing happened. then i put it in drive and again nothing happened. The gear shifter also glides alot smoother through the gears. please help!! more than likely you lost ...

but will go in drive I can put the shifter into reverse, but when I hit the gas pedal nothing happens. If I put it in drive, I can go forward no problem. Any ideas? you probably have to reset the ecu

when i put the car in drive or reverse, it does not move, engine stays on but nothing else happens The transmission needs to be rebuilt... the solenoids aren't working right for the forward or reverse

...Loosen it and put car in reverse (not running) turn switch so that reverse lights come on. semi-tighten switch and check that it starts in both park and neutral. If not you need to change the

...put it in reverse on reasonably steep incline and it wouldn't budge. Gave it a good amount of revs but nothing happened. Although it does reverse on a flat surface. Any suggestions??? Could be shift ...

...put the car in reverse can you feel the transmission engaging? You should feel a slight **** when you put it in reverse with your foot on the brake. If you are not feeling this, your transmission ...

...put the reverse gears it will accelerate infront instead.what do i do? It sounds like the reverse band broke. Typically with automatic transmission when you put the transmission in reverse a couple ...

put in reverse nothing happens one of 2 things. 1 the reverse gear is out on transmission or 2, the trasmissions on chrysler are bad about computer module in transmission going bad. either way you are