2004 Chevrolet Monte Carlo "switch" Questions

Ad

Question about Chevrolet Monte Carlo

1 Answer

Why don't lights work? Installed new dimmer switch Both the headlight switch and the BCM provide a ground, or control circuit, to the headlight relay coil circuit for manual or automatic headlamp ...

Ad

...wires the black wire goes to ground. the dark green/white wire goes to the power steering pressure switch. the other wire on that switch is dark green and it goes to the low pressure cycling switch. ...

Ad

Question about Chevrolet Monte Carlo

1 Answer

how do you remove lite switch on 2002 monte carlo Is your switch a pull style switch? if so, there is a release button on the switch itself. This allows the knob and shaft to be removed, allowing ...

Question about Chevrolet Monte Carlo

1 Answer

...light and no panel lights. she dose have break lights and turn signels. could it be a fuse or the switch? Probably the headlight switch. To remove the pull out part of the switch, there is a button ...

Question about Chevrolet Monte Carlo

1 Answer

Where is the Relay Switch on a 2002 Monte Carlo? My headlights stop working...someone said it could be my Dimmer Switch, but everything on my Dimmer Switch works....So I thought I would start with the

Question about Chevrolet Monte Carlo

3 Answers

I need to jump the drivers side window up I have a new switch ordered but the window is down I have the switch out Just need to jumper the wires to go up use a paper clip one way it will go down and ...

Question about Chevrolet Monte Carlo

2 Answers

...rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working This is a common GM specific problem. Your turn signal switch ...

HOW DO I CHANGE A HEADLIGHT SWITCH IN A 84 MONTE SS THE SWITCH PUSHED IN THE DASH. I GOT A NEW SWITCH AND A USED DASK CLUSTER BUT HOW DOES THE SWITCH ATTACH TO THE BACK OF THE DASH CLUSTER? go to ...

Question about Chevrolet Monte Carlo

2 Answers

headlight problems headlights only work when pulling high beam switch If the lights work when moving or holding the high beam switch there is a good possibility the switch itself is bad. The switch is

Not finding what you are looking for?
2004 Chevrolet Monte Carlo Logo

873 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...