2001 Chevrolet Malibu "replace intake gasket olds" Questions

...replace valve cover gasket 1998 chevy malibu valve cover gasket 1998 chevy malibu The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air ...

replace the intake gasket and I have coolant coming out of the overflow tube. But I don't have any white smoke coming out of tail pipe. And the vehicle runs perfect it doesn't have any problems at all

replace the heads,you should use new head bolts because the the old ones stretch.Those intake gaskets also have a habit of leaking as well. you repair both at the same time to equalize the performance

...intake to replace the original because the water jacket leaks at the thermostat. I removed the old intake and found the rubber gaskets inbedded on the engine side and the new intake has the rubber ...

...REPLACE INTAKE MANIFOLD ON A LINCOLN HOW DO I REPLACE THE INTAKE MANIFOLD ON A 1999 LINCOLN TOWNCAR? answer , very carefully ... drain coolant , remove and mark all vacuum lines , make a schematic to ...

...replace intake gasket when I remove intake to replace plugs? Yes always replace old gaskets to insure they are properly sealed I don't think you're taking the intake off its the plenum an not ever ...

...replace a intake plenum gasket remove and replace Well basically, you remove the intake plenum and replace the gasket and reinstall the plenum. Here are the steps:1. Disconnect the negative battery ...

...gasket and intake replaced because they were cracked. When I left the mechanic the car was idling really bad to the point where it wanted to die and the mechanic told me that the idle problem will ...

intake manifold gasket on5.7 engine.Water started leaking when I filled resivoir.Why? Assuming that the leak was coming from the gasket that you just replaced, it could be due to several factors which

...replace the head with a new one or have it machined true. Install new gasket and get torque specs with new head bolts and follow torque sequence using the correct torque specs. Clean exhaust, intake ...