2001 Chevrolet Malibu "8 throttle body" Questions

...throttle body, there is a metal tube around 8" long, the stat is at the end going into the engine. you have to remove the throttle body to access it, so pick up a throttle body gasket before starting ...

...throttle body cleaner. use a old tooth brush to clean it, or similar. this should do the trick if it is not bad!! also check wiring to it for broken wires etc. have a good day !! do not push on valve ...

throttle body! remove valve and clean with carb cleaner. check and clean out were vavlve fits on body for carbon.do not push on end of valve, supposed to be 1-1/8 from body of valve use old toothbrush

...throttle body, remove wire connector, remove the torx screws that hold it on. when off of car. clean valve on end you can use a old toothbrush or similar to do this. do not push in on valve it will ...

8. The engine is in closed loop.The coolant temp is 195. No check engine light. Thank you for your help. i would check the iac valve on all three of your vehicles and on the ones that are sticking and

...in on valve as it will lose its setting. also if you had to remove the throttle cables, make sure they are not binding somewhere. on my 2000 3.1 it is 1 and 1/8 from body to tip of valve. good

...Throttle Body(6)PCV Valve(7)Fuel Pressure Regulator(8)To Transaxle(9)Intake Manifold(10)To Top Port of EVAP Canister(11)EVAP Canister(12)To Fuel Tank(13)To Accessory(14)To Vacuum Brake Booster(15)MAP ...

...8 wrench untill you see the coolant come out( bleed the system for air) make this several times turn on your heat too and bleed again and watch your upper and lover hoses for any visible leaks fallow ...

...throttle body side is about 3/8 where the hose connect. I would use OEM parts, not after market as this sort of thing can happen and cause problems. Sounds like you need a different hose for the ...

...throttle body using an 8-mm socket and socket wrench from the socket set. Remove the IAC valve and gasket from the engine compartment.Position the new valve and gasket in place on the throttle body, ...