2000 Chevrolet S-10 "remove glove box s10" Questions

where is the blender door on 2000 S10? Inside the heater box under the dash on s10 should be pass side behind the glove box but you need to remove alot of the dash so you can get into the heater box

...remove the entire dash assy? have glove box access hole open, and ashtray removed, can see a couple of screws, but appears that there won't be enough clearance to drop box.. on 1992 s10 remove the ...

...says its behind the glove box. do i have to remove the whole dashboard to replace this thing?, thanks Dave Bicknell Usually just remove glovebox...take care with plug and chip pins they easily

...S10 PICKUP HEATER CORE REMOVAL am a mechanic but have spent 2 hours already at the dash and can't even see it yet!! try in the glove box area. may need to remove it too see the cover for heater

...remove. First the glove box door, ash tray, the panel that surrounds the stereo and stereo, also the tray that holds the ash tray and last inside the glove box there is a small plastic panel at the ...

...Remove the radio, headlight switch module and glove box by turning their screws in a counter-clockwise direction. Remove the main dashboard by unbolting it at the front, between the windshield and ...

...Remove the glove box.On the passenger side under the hood, remove the two hoses connected to the heater core. remove the connectors/airlines connected to the box, remove the lever on top of the ...

Remove: Open the glove compartment. Lift the tab to allow the glove compartment to swing down. Use a flat bladed tool to release the flasher from the harness connector. Remove the flasher. To Install:

...under the glove box. It probably has old papers from the glove box or tree leaves. remove  3 to 4 7mm screws that hold it in place. Drop the fan and re-install the new one or clean out the

i want to remove the dash on my 96 chevy s10 pickup so i can change out the heater core re-think that? remove glove box first and look again