2000 Chevrolet S-10 "miles per hour speed sound" Questions

Ad

...say, if I am traveling at 40 miles per hour, the speedometer registers 70 or 80 miles per hour. Sounds like you need to replace your speedometer cable that runs from your dash to your

Ad

...does not work nor can get over 45 miles per hour speed according to experts needs to replace the wiring is it true.? No it sounds like you have a bad output shaft speed sensor on the

Ad

Question about Chevrolet S 10

1 Answer

...miles per hour, i can feel something under my feet that rest on the left side .i can feel the rotation but it feels like wheel is going to come off. wheel is on right. and it only does it when i hit ...

Question about Chevrolet S 10

1 Answer

NOISE LOUD NOISE WHEN CAR SPEEDS UP TO 40 OR 50 MILES PER HOUR If it sounds like a plane and changes when you turn L & R loder and quieter. it is more than likely a wheel bearing.

...the speeds of 53 to 58 or 60 miles per hour, doesn't seem to affect the drive ablitiy but the noise is very loud have your wheel bearings checked sounds like bearing noise to me or exhaust ...

Question about Chevrolet S 10

1 Answer

...speed beyond 20 miles per hour. It sounds like your automatic transmission is not able to switch gears. Take the car to a shop before this problem gets any worse. Hope this helps! Please rate 4

away when I accelerate past about 7 miles per hour, and returns when I decelerate to the speed. I have checked the transmission fluid and added some, but the noise remains. Maybe its an exhaust rattle

...over 40 miles per hour See if you notice it getting louder and softer as you turn a little to the left or right while you are going at speeds that makes the noise. If so, it is a front wheel

...is acting up, riding the brake will dis-allow it from locking. Do this to see if it might be a lock up converter issue. (They usually lock up for better gas milage around 45-50 miles per

...brakes at speeds exceeding fifty miles per hour sounds like the front rotors are warped, sometimes they can be machined as long as they are within the minium thickness. I hope this helps, good ...

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

1,205 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...