2000 Chevrolet S-10 "doing code test basic" Questions

...code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing ...

...code reader. A test light, ohmmeter, digital voltmeter, vacuum gauge and jumper wires may also be required. However, you obviously do not need any of the aforementioned items to inspect vacuum hoses, ...

...test the wiring harness to try and induce the fault. This code is basically identical to P0385. This code P0335 refers to Crankshaft Posistion Sensor "A", whereas P0385 refers to Crankshaft Position ...

...test and everything passed except egr no code but extreme loss of power new egr twice and no vacumm leakss or misfires power loss is erratic but mostly on take off I'm kinda guessing with the ...

2003 s-10 truck would start and then shut off immediately and security light would come on. now truck will start and run but all the lights are on, on the dash. what could the problem be ????? Your ...

...test the ground, its basically a dead 02 sensor,If you have a misfire you would have code as lean activivty, basically there is no lean to rich activity for this code to come on how do I fix misfire ...

how to check over drive censor over drive censor light on You run a fault code test. You need a basic code reader or you can have a local Autozone do the test for free.

...code? Once you have repaired the fault clear the codes, test drive the vehicle and re-check the codes do not come back. If you have codes during the SMOG test they might fail the vehicle. Repair the ...

...on when I insert key but with no clicking or turning over to start.....Any ideas? Also, its below freezing where Iam How do I go about testing OBD2 fault code? Start with the basic OBD2 fault code ...

plz help mi,mi 240sx 95 problem is rpm look crazy ,mi engine is off You need to do a basic engine fault code test. To do this test go here.