2000 Chevrolet Blazer "tie rods car" Questions

tie rods and Idler arms. Is there a diagram? I thought my tires needed to be balanced, but when the shop put it up on the lift, the mechanic told me the inner and outer tie rods and Idler arms need to

I NEED A DIAGRAM OF A 2000 CHEVY BLAZER STEERING COLUMN TO TIE RODS. Steering column above. Tie rod and linkage below. 2WD not 4x4 Sorry I don't have pic of steering gear.

...it turns off what would it be?? alignment, wheell not balance right, wheel bearings going out. bad tie rod ends. raise the cars front wheels off the ground and grab the tire and wiggle it back and ...

...any at the back of the engine. If you check anything you distrubed when you changed the tie rods. More info on the car would nbe helpful Maybe your shaking comes from your engine missing ...

...my wheel even a little i hear a scapping noise Most of this problem it came from the dry balljoint, tie rod and broken suspension lower or upper side before you fix the lower suspension try to put ...

find all the parts your needing parts and labor for tie rods, ball joints, control arms springs shocks idler arms pitman arms parts and labor will probably run you close to 1500 dollars probably lower

my steering is loose when u turn about a inch before the wheels turn blazer s 10 4 x 4 check tie rod ends they might be wore out when you turn the steering wheel they should move immediately with no ...

we hit a stump. we bent something that the tie rod ends attach to we hit a stump. we bent something that the tie rod end attatch to right behind the wheel, made of very clunky metal, any idea what its

how much to replace front left tie rod outer tie rod like $50 bucks +/-

...tie rods shouldn't move in it. Have a look at the control arm bushings. If they are squished out and noticably cracked then they need to be replaced. Check both the uppers and lowers. If that all ...