...throttle body.ene cable is throttle cable,one is cruise if equipped, and the other one will run to the transmission. It has a button you mash to adjust.It isn't obvious but you can get a screw driver ...
where is the IAC located in a 1992 Chevy Blazer? It's located on the side of your throttle body and will be held on by two screws
location for fuel pressure regulator on 97 chevy blazer. engine code W Two places to look...if you have separate injectors for each cylinder then regulator should be at the front end of the fuel rail.
Throttle Body On A 1991 Chevy Blazer S-10, 4.3L Hi, I have a 1991 Chevy Blazer S-10, 4.3L, 4 wheel drive. One day I went to start it and it won't start. There is no fuel coming up to the throttle body
Where are these valves located? where are the EGR and IAC valves located on a 93 Chevy Blazer s-10? EGR(top)IAC(3bottom views).EGR will be on the intake,IAC will be on the throttle body.
WHERE IS MASS FLOW SENSOR LOCATED ON 95 CHEVY BLAZER. The mass air flow (MAF) sensor is located in the engine air intake between the throttle body and front of the truck.
...It more than likely has port injection, which is an injector for each cylinder. The older ones, (after carbs) had throttle body injection, that looked like a carburator, but had one or two
location of the map sensor on an 02 chevy blazer Map sensor located on the intake manifold (4.3 vortec) on the passenger side between the ignition coil and throttle body. Thank you for using Fixya and
...sensor should be right by the throttle body. Don't disconnect it without disconnecting your battery's negative cable first. You will damage it if you disconnect it with the battery
...throttle body. Then it runs fine until next time. Does it have a fuel regulator and where is it located? Does it have a fuel relay and where is it located? You can hear the fuel pump come on when you ...
3,418 questions posted
Usually answered in minutes!
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
982 Questions