2000 Chevrolet Blazer "adjust clutch fan" Questions

Ad

Question about Chevrolet Blazer

1 Answer

...fan clutch tool or a large adjustable wrench. Some fans have reverse threads (ie: right = loosen, left = tighten) so take a look at the threads on the new fan to make sure your turning the fan the ...

Ad

...clutch assembly Serpentine drive belt (if equipped) by positioning the belt over the pulleys and carefully allow the tensioner back into contact with the belt. V-belts (if equipped) and adjust the ...

Ad

...that also says heater? there is an idle solenoid & they can cause fluctuations! all autos CREEP a little if heater & fan are ok it might be the electric clutch on the compressure not ...

Question about Chevrolet Blazer

2 Answers

...adjust and or replace belt. Visually check to see if the compressor is coming on .The pully will free spin all the time.When the compressor engages you will her a click then the you will see the ...

Question about Chevrolet Blazer

2 Answers

...fan clutch To remove fan clutch, you need a special clutch fan tool. Sometimes i can remove it with a large adjustable wrench while locking the water pump pulley. Remember to turn counter-clockwise. ...

Question about Chevrolet Blazer

1 Answer

clutch fan replacement 2003 Isuzu ascender Need to replace fan clutch however don't know which way to turn large nut to remove from water pump pulley? Thread on type. Loosen fan clutch counter

...fan clutch in order to change the water pump fan clutch will not come apart after removing the 4 bolts Thread on type. Loosen fan clutch counter clockwise for removal. Requires 36mm wrench (or ...

...adjust the clutch or the peddle to make the clutch engage and disengage sooner then pushing the peddle all the way to the floor? Also the the fans for the radiator are not kicking on and the relay is ...

Question about Chevrolet Blazer

1 Answer

...clutch retaining bolt and water pump assemblies evenly and alternately to 15-22 ft. lbs. (20-30 Nm) for the 3.8L engine or to 36-47 ft. lbs. (48-65 Nm) for the 5.0L engine. 3. Install the fan belt. ...

Question about Chevrolet Blazer

1 Answer

...clutch retaining bolt and water pump assemblies evenly and alternately to 15-22 ft. lbs. (20-30 Nm) for the 3.8L engine or to 36-47 ft. lbs. (48-65 Nm) for the 5.0L engine. 3. Install the fan belt. ...

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

3,418 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...