...chev silverado 1/2 ton 4wd 5.7 350 automatic i just replaced motor ,prior to that i had alot of hesistation cant get truck to drive with out feathering gas pedal cant stomp the gas acts like its ...
...2" square finned relay (actually a 2volt drop diode) Use pliers to bend retaining bracket. Remove and unplug. 1999-2006 Chev/GM full size trucks with dedicated DRLs. Some people have put in amber ...
...GMC denali. u may need 2 replace the timing gears as well old gears may have worn teeth.i had same prblem with a chev mtr fitted a chain&gear set fixed it right up. ps make sure u use a new ...
...chev 2500 will not go into gear have replaced all but clutch master. Bleed neumerous times slave rod has 2-1/2 inches of throw and still will not release. Any help. Please. I hate to say it, but it ...
...gears, at constant speed, it surges. Your transmission has about had it.Sometimes it may be a sensor which you can call and ask,but it sounds like it's on it's way out.That's exactly what mine did ...
...2 other transmisson rebuilder and they both said it is not machanical they agree it works like it should i have all me gears and it changes like it should they said they do not think rebuildind it ...
...2.5L has a timing gears set-up, no timing belt or chain, so if not noisy, probably good. Check your timing with a timing light. Look at the cone pattern of the fuel spray out the injectors-look down ...
Question about Chevrolet Silverado 1500
...2) 10 mm hex screws. Replacing this is a simple matter of unplugging the electrical connections, unbolting from the manifold and installing a new coil in the reverse procedure. Good luck, and keep me ...
2 year till my next inspection but the car Slams gears when the TRAC OFF light comes on oh and when all this happens the cooling fans start running my dad has no idea so in info please help srry about
6,290 questions posted
Usually answered in minutes!
159 Questions
130 Questions
67 Questions
56 Questions
12 Questions