Replacing upper ball joint (2001 Silverado 1500) I am replacing the upper ball joint on my 01 Silverado and I need some advice. I have replaced ball joints on older model chevys but this one looks ...
Question about Chevrolet Silverado 1500
...ball joint broke off of socket on 97 chevy pickup how difficult is this to replace? if its original its not that bad just have to cut the rivets of the old ball joint body and remove it from the ...
Question about Chevrolet Silverado 1500
...ball joint broke off of socket on 97 chevy s10 pickup how difficult is this to replace? Its not too difficult if you can get the broken piece out of the spindle. It is a friction fit and normally a ...
...shock bolt removed, upper and lower ball joint seperated (book will say only one but it is not true) and steering knuckle and axle nut removed. CV joint simply unbolts at differential output
...ball joints in a 2003 chevy z71, i got the upper but do i have to remove the four wheel drive line form the gear box or the wheel all you have to dissconnect is the out 4 wheel drive remove the ...
...was blown i replaced box with reman from advance auto about $200.00 and flushed system , drove great problem solved . could be a bad ball joint (i think on the left side if its hard to the
Question about Chevrolet Silverado 1500
...chevy silverado 6cyl. it has 180,000 miles on it. a couple of years ago it started wobbling but now it has gotten alittle worse. I replaced the tire rod ends and wheel bearings but i still have a ...
Question about Chevrolet Silverado 1500
chevy truck ext. cab. seems to turn too far right and left. feels and looks like my tires are leaning and sounds like they being pushed/pulled rather than turning. had all ste new upper and lower ball
chevy silverado 1500 has a bad shake to it when you hit about 35-50. At 50 it levels out and is back to normal. Already replaced ball joints. Any ideas?? I'm thinking maybe the tires (36's) or
...replacing the upper ball joint. It looks like there are pressed in revits, do I drill them out? Or do they need to be broken out with some type of splitter? Yes you can drill them out. The new ball ...
6,290 questions posted
Usually answered in minutes!
159 Questions
130 Questions
67 Questions
56 Questions
12 Questions