1999 Chevrolet Silverado 1500 "rear tire locks reverse" Questions

...rear tire drags in 4wd When I shift the transfer case into 4 high or 4 low and the transmission is in drive or reverse it seems like the left rear tire drags, almost as if it wants to go in the other ...

...tire howl with gear howl, be sure.The rear end can run 3 to 500.00 if not more. Ck the gear oil in the rearend for metal content. That will tell you alot. The hard shifting is generally from a sticky ...

...rear tire is skidding because it's trying to turn backward - rear passenger rear tire is going forward and rear differential has no option but to turn the driver tire in reverse (driveshaft locked). ...

and bad both.
car stops moving,after moving in 1st gear or not at all
or skids shifting to second in drive.2nd.
rear tires skid?

if the rear axle on the car locks up, in motions say so

...rear end locked up. Both back tires. While this happened I was using the brakes. When I came to a stop I let off and tried going, didn't move like I was still on the brakes. OK I got it in my ...

...rear and right front tire lock up when truck put in reverse Take your truck to a brake shop and have them look at your emergency brake at the wheel. This should be free. Something may be cause it to ...

...tire seized and wont turn Started the car went to drive and my back right tired locked up and wont move, but i could put it in reverse and it would move... what causes this? it appears that the brake ...

...rear dirver's side tire locked up. I reversed a bit and it seemed to free the tire but locked up again after a second. sounds like something came loos in your brakes drum or a wheel baring is faulty ...

reverse but won't drive forward, back tires dragging If it has self-adjusting rear brakes, they've become fully locked. You'll have to go into the adjusters and back them off until they don't lock the

...reverse. Car has 40,000 miles on it, any suggestions? disconnect rear drive shaft to see if tires move if not the rear end pinion gears might have a bad bearing causing the lock up.the fastest way to ...