1999 Chevrolet Silverado 1500 "need weld converters" Questions

Ad

Question about Chevrolet Silverado 1500

2 Answers

...converters welded on. As for the 300 random misfire code you need to diagnose the cause of the misfire, or clear it and see if it returns. I removed the 2 converters and straight piped them. Didnt ...

Ad

...was flushed-it wud cause an issue-nevr do that----sounds like a shift solenoid is bad or linkage needs ajust------get it to an honest specialist n lettum do a pressure chec and test drive IF

Ad

Question about Chevrolet Silverado 1500

1 Answer

...need to drop out the valve boby and for the most part rebuild the reverse circute. Now for the hard stuff. Other problems you could look at. imput housing assembly - 3-4 apply ring stuck in applied ...

...need them,I will check at the auto parts store, to see if OEM Converters are available. Then I will remove the two factory ones and weld in the new ones,duplicating the factory set up. They should be ...

Question about Chevrolet Silverado 1500

1 Answer

...this myself? Do I need a muffler clamp and/or need to do some welding? What do you suggest? It will need to be welded.Take it to a good welder and have them weld a new piece of pipe on it.Good

Question about Chevrolet Silverado 1500

1 Answer

...that stop the engine light from coming on or would i have to replace the whole converter? You need to replace the catalitic converter. If you try to weld it the heat will destroy the interior

Question about Chevrolet Silverado 1500

1 Answer

...need some peices of exhaust take the old unit and the new one to a welding shop have them make you new one the same length as the old one and cut the flanges off the old one and weld to new one all ...

Question about Chevrolet Silverado 1500

2 Answers

need to weld it in place. Normally since the location of the converter is directly under the cabin you would want a professional to do the work to ensure there are no leaks. A leak in the exhaust here

Question about Chevrolet Silverado 1500

1 Answer

...need to buy the direct replacement which will cost a good amount of money (hundreds) or you can buy an aftermarket which you will have to cut out and weld in. I recently bought an aftermarket ...

Question about Chevrolet Silverado 1500

1 Answer

...BUT IF SOME HAS CHANGED BE FOR IT MAY BE WELD ON SO IF ITS STILL BOILT ON YOU WILL NEED TO RASE CAR UNBOILT IT AND PUT NEW ONE ON IF WELDED YOU MAY NEED TO GO SOME WHERE THEY CAN WELD NEW ONE IN ...

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

6,290 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...