1999 Chevrolet Silverado 1500 "changing fuel filter 2000 chevy" Questions

...replaced fuel filter, fuel pump, and crank sensor. temp gauge dives to cold then to hot. then back to normal temp after cutting out has stopped. Please help! have you changed your temperature ...

...fuel filter because bu running out of gas you probably sucked all the crud up from the bottom of the tank. Do this first so you dont damage the engine from all the junk. After this if it does not ...

...fix it. I tend to think it's not the fuel pump because it stays running, but could be wrong. FIRST CHECK THE FUEL PRESSURE AT IDLE AND WHEN YOU TRY TO TAKE OFF. CHANGED THE FUEL FILTER LATELY? ...

fuel filter and I can hear the fuel pump pressure up, but I pulled the #1 plug and cranked the engine but didn't see any spark at the plug. I know I could change the plugs/wires etc, but thought there

or air.I've already replaced the fuel filter and pump with no change. What steps do I take next? check to see if the mass air flow sensor is plugged in and check for a loose or torn air intake bellows

...fuel filter and what not, any help? Try cleaning the MAF (Mass Air Flow) sensor diode with some throttle body cleaner. the sensor heats up and measures how much it's cooled off by the in coming ...

...fuel filter, collant temp sensor and timed it and it still does it.. do you check the egr valve or the selenoid ........ look with the engine runing pull the trotle cable to rev the engine check the ...

...fuel pump and filter. Has 55 to 60 fuel pressure. Replaced intake gaskets, plugs and wires. Plugged the computer in and cylinders 4&5 are the misfires. Swapped around coil packs, no change. Swapped ...

...fuel filter lately? If not do so. Sounds like fuel restriction. Filter usually on frame rail passenger side. Good luck! I had the same problem on my 2000 chevy blazer 4x4, i changed the fuel filter ...

...changing fuel filter i changed the fuel filter on my 2000 chevy blazer and checked the distributer cap and now it won't start if it does not start after you check your distributor cap that means you ...