1999 Chevrolet Silverado 1500 "2010 brake" Questions

brakes pulsating Here is what I have tried: Turning front rotors first then New Rotors. New Calipers, Turned rear drums twice,then New Rear drums, Pulled axles and checked. New wheel Bearings. New ...

2010 silverado cruise control will not engage press switch but do not get the cruise control indicator light on the dash Just to be sure... (since i just did this today). Steering wheel CC would turn ...

When I apply brakes I get a severe vibration in whole pickup Here is what I have tried: Turned front rotors, then new rotors, new Calipers, turned rear drums, then new rear drums, new brake shoes and ...

why do i have no pedal after bleeding? i installed new pads and rotors on the front of my truck,i compressed the calipers by putting a line to the bleeder and opened it to relieve pressure,fluid went ...

...2010 silverado will not work either from the steering wheel or key fob the fuse is good and horn will sound power applied to top of fuse You either have a wiring problem or a failed bcm.

I am ...

...2010 Subject: Manual Transmission Operating Characteristics Cold Operation Manual transmission operation will be affected by temperature because the transmission fluid will be thicker when cold. The ...

...brake lights. Cash is tight until my wife wraps up grad school. So, what should my next step besides tracing out the airbag wires under the seat this weekend? Buy another new BCM and have it ...

2010 Hyundai Getz intermittent brake failure. Pedal flat to the floor. ABS and ESP OFF warning lights activated. Why are the brakes failing? Has had new front brake pads. Brake lines have been bled. ...

...brake lights on my daughters 2010 Hyundai Accent, come on when she steps on the brake pedal. why? You listed this vehicle as a 2006 Accent, yet you write it's a 2010. If 2006, it's probably ...

parking brake don't hold on 2010 ford edge parking brake don't hold on 2010 ford edge under factory warr bring it to them