1999 Chevrolet Monte Carlo "special tool removing steering wheel" Questions

Ad

Question about Chevrolet Monte Carlo

1 Answer

Special tools are needed to remove the steering wheel and the locking plate underneath. The airbag capacitor must also be properly discharged before accessing the steering wheel. Please let me know if

Ad

Question about Chevrolet Monte Carlo

2 Answers

...or not. it takes a special puller to remove the steering wheel. the air bag just pops out with a release tool in the release hole on the side of the steering wheel 1996 chevy blazer key will not ...

Ad

Question about Chevrolet Monte Carlo

1 Answer

...special tool 204-312 in to 204-309-X-Type Insert special tool 204-312 in to 204-309. Support the wheel knuckle on special tools. NOTE Make sure wheel bearing is correctly orientated with the colored ...

Question about Chevrolet Monte Carlo

2 Answers

...special tool to remove the steering wheel, it is called a bolt grip puller. There is a special tool to compress the steering lock plate to be able to remove the retainer to take it off. A simple pair ...

Question about Cars & Trucks

1 Answer

...steering wheel locking device (there is a special tool ) then with a mark possion of steering wheel before removing retainer nut, next you'll need a steering wheel puller,reassamble in reverse

...tool i have can touch it,does it stay by friction? i need to remove the steering wheel to replace the ignition lock and turn signal cancel,i am told i am nuts to even attempt this. If you are talking ...

Question about Chevrolet Monte Carlo

1 Answer

steering wheel off. You need the special Torx Driver with a center divet to remove the steering wheel cover and the switch itself from the column and put the new one in place. You don't need to remove

you need some special tools also like a steering wheel press too remove the retaining clip You will have to use a ouller to remove the steering wheel. Often many parts houses will rent or loan a tool

Question about Cars & Trucks

2 Answers

...use a steering wheel puller to remove wheel, remove locking plate with special tool, there you should see whats holding ignition in either a pin or screws, remove them and reinstall in reverse

Question about Chevrolet Monte Carlo

3 Answers

...special tool for unwinding and winding in the tie rod end from SnapOn that can be used with a 1/2" impact wrench to quickly adjust in and out. Finally, you'll have to have a 4 wheel alignment ...

Not finding what you are looking for?
1999 Chevrolet Monte Carlo Logo

588 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...