1998 Chevrolet K1500 "code 98" Questions

...98 chevy truck.....I can see the wire behind the glove box when I take it out, but there is no connector...... 4.3 vortec... there is no esc wire on a vortec. the distributor is set to zero degrees. ...

...misfire I have 98 Chevy 1500 5.7ltr vortex I'm getting a code p0308 I changed the #8 plug and injector but still getting a p0308 code... HELP!!!!! I had same problems could be EGR ...

...98 has 1st and 2nd starts out in drive then nothing have to put it in 2nd to go could be the shift solenoids in the transmission. Try pulling codes even if light is not on. Sometimes it will set a ...

98 chevy k1500 code is gas tank CHEVROLET PICKUP 4x4 350 extended cab Check the gas cap is sceruely fastened, check for leaks in the filler tube for gas tank, and check for leaks in the hoses/tubes to

...PREMIUM Part # SP461M Includes Fuel Pump, Sender, Float, Strainer and Fuel Reservoir w/ Module Codes GAP, GAV, GDJ, GFK; 7200 GVWR; Exc. RFI Filter Pump;Wiring Harness Included ...

...is burned out if it does not come on and then go off when you start your car did you check for any codes.could be burn

98 K1500 4X4 5.7 - CRANK, NO START, FUEL SAMPLE IS CLEAN, PRESSURE SEEMS O.K. THOUGH I HAVE NOT MEASURED IT. 12V AT THE COIL AND DISTRIBUTOR (BOTH NEW) AND NO CODES. I STARTED THE TRUCK AND RAN IT FOR

98 chevy z71 5.7 350 vortec, i have a p1345 code that stays on i clear it and as i restart the truck it comes back on, the truck runs great and has a small delay when starrted.. what can/do i need to?

98 k1500 4wd with a 5.7 ltr. 350 I've overhauled the engine from the block up and got it all New plugs, New #8 feul injector, cap , thermast, . I keep getting a p0308 code no other codes check

98 taheo transfer case shifting problem will not shift into 2 hi, when pushing the buttons tranfer case defaults to 4 low, and will not shift out. the only i can get it out of 4 low is to disconnect ...