1987 dodge dakota ive set the timing on the truck... it runs great for a while and when i drive it over a bump or anything rough it seems, the truck will not stay running without holding the gas down ...
...chain on 1987 dodge dakota 3.9l v6 The crank & cam gears have marks on them,shouldn't need a diagramTurn it over & align the gears & familiarize yourselfwith what your taking ...
Question about Chevrolet 1500
1987 dakota, will not crank over, battery,starter fine, whats wrong? 1987 dakota, 3.9 v-6,auto, will not turn over, battery and starter new, replaced starter relay yesterday. can't find a fuse
Question about Chevrolet 1500
...field control circuit open or shorted. ... allpar, the Chrysler - Dodge - Plymouth - Jeep site. Note: Allpar ... FauxPar: Return of the Barracuda, 1987-1996 Dodge Dakota pickup trucks, Pinner:
Question about Dodge Cars & Trucks
...1987 dodge Dakota will oil on end of crank sensor cause engine to misfire and cut off and back on yes, is possible the distributor pickup coil must be kept clean and dray PCV good and Distrib shaft ...
Question about Cars & Trucks
...1987 dodge dakota it dies everytime i try to crank it could it be The battery or wat could it be it dies when i try to crank it could it be the battery HAVE THE BATTERY TESTED, ORILEY AND AUTOZONE DO ...
...1987 dodge dakota? i can seem to find the OBD2 connector in my 1987 dodge dakota it should have one right? it has the carbed v6 in it No, OBDII started on some 1995 vehicles and all vehicles 1996 and ...
Question about Chevrolet 1500
turn the key on and nothing, no dashlights, no start, no crank..... but headlight and brake lights work The alternator is probably shot but the battery still has some power in it. Or the battery may ...
Question about Dodge Cars & Trucks
...1987 dodge Dakota will crank sender misfire if oil is on end of sensor there is no ckp only CMP cam sensor inside the distributor. no engine told on this truck (USA)?2.2l or 3.9L???????? OK 2 engine ...
Question about Dodge Cars & Trucks
...dodge dakota 1987 3.9 were,s the location on the truck of the crank and cam sensors? The crankshaft sensor is mounted between the engine and the transmission bell housing on the upper right side of ...
1,299 questions posted
Usually answered in minutes!
795 Questions
754 Questions
575 Questions
561 Questions
414 Questions