replace belt tensioner on 1998 camaro v6 how to replace belt tensioner on 1998 camaro v6 You'll need a socket and breaker bar to do this job easily. The socket will be of the size 9/16 to 3/4 in that ...
my serpentine belt came off and i need to find the tensioner pulley to put the belt back on. 2000 chevy camaro 3.8L v6 there is a pullry near the center with a half inch drive rachet wrench will fit ...
Question about Chevrolet Camaro
...need. Make sure you check ALL of the other belt driven components including idler pulleys and belt tensioner pulley. A worn tensioner can squeak also. Shouldn't have any play in it. Is it at all ...
1992 camaro alternator tension where is it located. so i can get the belt tight there is not you have to replace the entire thing it is wearing out it is spring activated but any junk yard will have ...
...a belt squeal. Could my alternator or water pump be making this noise? Yes, it could also be the tensioner or idler pully making the noise. I would remove the belt and try to turn each pully by ...
I have a 1994 chevy Camaro I have put 5 belt tensioners on it in the past 450 miles all are after market either the bearing goes out or the spring breaks what is going on After the second one I would ...
I have a 1996 6 cylinder Camaro and the tension pulley just broke off the motor. Are there any fixes replace the tensioner assembly is only fix
a 1988 IROC-Z Camaro. I replaced the alternator and now have no tension in the belt. I took off the tensioner to take to a nearby garage so I could borrow a tool to release tension on the belt. When I
I need to replace the belt tensioner OK.. take belt off, unbolt it and replace it. What's the question?
Tensioner Pulley is grinding Grinding Noise is coming from the front engine Remove the serpentine belt(s) and spin all the pulleys by hand. If one sounds loud, replace it.
640 questions posted
Usually answered in minutes!
737 Questions
576 Questions
391 Questions
331 Questions
306 Questions