1994 Chevrolet Cavalier "pop riviter" Questions

...out how to get the dome light housings off. there are no screws visable. might be rivited? did u pop the cover off the dome light?..screws are usually under the cover, where u would access to ...

I got the door panel off. My problem is that I can't get the pop rivets off. Use a small punch to punch the center pin out of the rivit,then use a drill on the rivit head,the pin is hard,once it's ...

...to be riveted. You'll need to drill out the rivets, and, on the new motor, use either screws or pop rivets to reattach (do you have a pop rivet gun?). Charlie Yes they are rivited. You need to ...

...rear wiper on a 1996 Chevy S10 Blazer pull off the plastic cover on the tait gait. then drill the pop rivits out if not already done. switch the motor and put some self tappers in the place of the ...

...lock actuator you have to grind or cut or drill the rivit that holds it. Then you will need a 1/4" pop rivit to hold new one

...WILL NEED A DRILL WITH PHILLIPS HEAD ON IT, TO REMOVE DOOR PANEL.YOU WILL NEED A CENTER PUNCH TO POP OUT THE CENTER OF THE RIVITS THAT HOLD THE MOTOR AND THE REGULATOR TO THE DOOR.THEN YOU WILL ...

...it? Take wheel off, loosen crown *king nut with cotter pin*, use crow bar and hammer to to pop ball joint out, or use jack stand or another jack put on wheel hub and lower van. The weight of ...

...regulator or if the regulator has snapped. This is like a metal bar with bit the glass is bolted/pop rivited onto. See is you can slide it up and down from there or see if the motor has fell off! ...

...failed. Where can i get it repaired? A shoe store that repairs shoes could do it. Or you can get a pop rivet tool and rivets and washers at any hardware store or lumber yard like home depot

...for the power window on my S 10 chev. the fastners holding the operator to the door look like a pop rivit and are pulling thru the holes in the do, how window goes up and down, with a poping