1994 Chevrolet Camaro "starter teeth damage" Questions

...starter drive and could ruin the teeth on the fly wheel. The spring has gone bad in the solinoid or the shaft thats is activated magnetically is dirty and sticking, ther could be a problem with the ...

teeth by turning the front balancer with a socket and powerbar you can turn clockwise and inspect all the way around fairly easely remember to lock at it from starter input side to notice damaged back

starter, inspect the flywheel teeth for damage. Attach the solenoid wires, the smaller size crimp connectors go to the small 'S' terminal. Here's the fun part. The starter is heavy, get it in position

teeth. Remove starter and inspect flywheel for damaged teeth. If teeth okay replace starter or replace the bendix. my car wont start I got tune up change the fuel pump & the filter battery is good

...starter broke teeth on flywheel. What would cause this? several reasons the teeth on the ring gear were damaged from continuous grinding during pinion engagement or engagement of the starter when the ...

...starter teeth fully into the flywheel... or the teeth are damaged. In any case, a new starter is requierd soon to prevent damage to the flyweel and additional costs! Thanks for using fixya - a FixYa ...

...drive gear and or damaged ring gear teeth. I would suggest removing the starter motor and inspect the starter drive gear as well as the teeth on the ring gear for damage and repair/replace as ...

starter. check the teeth on the flywheel they maybe damaged causing the starter not to engage. you may have to shim the starter. were there any shims when you pulled the original starter off. Both old

starter will really mess up the teeth on the flexplate/flywheel. Try spinning the flexplate or flywheel a lil to get to some fresh teeth. There are a few ways to do this, rock the truck while in gear,

...starter, inspect the teeth on the ring gear. If they appear damaged, Porsche suggests replacing the original ring gear with a new ring gear (950 116 143 01), which is wider. The wider ring gear ...