...10 mins. The security light will stop blinking. Then try to start the car. I have to switch it to the off position first, before it will start. you need to get the code in order to proceed. There is ...
...security device acting up. Very common in these years for GM cars. To test if this is it, simply turn your key forward (to "on" position) until light stops blinking and eventually turns off (right ...
...security device acting up. Very common in these years for GM cars. To test if this is it, simply turn your key forward (to "on" position) until light stops blinking and eventually turns off (right ...
10 minutes for the security light stops flashing.Then turn the key back to the off position,remove the key,then try to start the car.This should reset the security system for a while.But,you will have
...SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 ...
...SECURITY" light will be flashing. After about 10 minutes, the light will stop flashing. . Step 2: Turn the key "OFF" then back to the "RUN" position. (Do NOT try to crank it yet) The light will start ...
...system by turning key to start then run security light will flash, after @ 10 minutes the light will stop flashing, when that happens then turn key off for 5 seconds, then try and start car. good ...
...SECURITY SYSTEM. PASS LOCK RESET GM CARS 1999 UP 1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat ...
SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes, the
2,566 questions posted
Usually answered in minutes!
1,538 Questions
1,504 Questions
1,435 Questions
1,208 Questions
1,285 Questions