...air bleed, while it's warming up. Allow rad fan to come on & off 2 or 3 times, before putting rad cap back on, to try & make sure all airlocks are out of there. If it overheats shut it down & let it ...
Question about Pontiac Sunfire
...air still in system? tried to bleed it 20x Do you did you take out the rad. or have a shop do it for you. Your problem sounds more like the rad is not the right size for your car. The difference is ...
...bleed the cooling system on a vs supercharged statesman . Makes sure you have coolant in the radiator and over flow botthe. turn the heater to the on position and on high. make sure you have plenty ...
Question about Cars & Trucks
...bleed valve. Can you tell me where it is located? After coolant was added and car ran the water came out of the resevoir,very rusty looking water. Can you help???? Was the thermostat changed? I would ...
off the heat. Hello did you flush out the cooling system while you had you coolant drained?this would be ideal to do at t hat time.Also be sure to bleed All air out of cooling system to avoid air lock
Question about Pontiac Sunfire
...bleed the air from the cooling system. To do this raise the front of the car as high as possible and fill the coolant bottle completely full, run the engine until it gets to high side of normal temp ...
...come in during normal run You need to replace the coolant sensor,and bleed all the air out of the coolant system.The coolant sensor does not sense air,or hot moster,only pure solid coolant,or
bleed cooling system The generic method of bleeding air from the cooling system is to use a floor jack or other method and raise the front of the car as high as poss, then fill the coolant recovery ...
Question about Ford Cars & Trucks
bleed air was the cap on the rad fill hole? It should be so the coolant system builds up the required pressure, may have to repeat this process a couple of times, after engine has cooled,the expansion
self bleed the system of air and the coolant will be pulled from the recovery tank to fill the void, repeat as necessary, never let the recovery tank run dry or more air will be pulled into the system
981 questions posted
Usually answered in minutes!
987 Questions
731 Questions
696 Questions
696 Questions
688 Questions