1998 Pontiac Firebird "change crank position sensor" Questions

change my Crankshaft Position Sensor on my 1997 Pontiac Firebird 3.8L,where is it located? The crank sensor is on the front of your engine behind the harmonic balancer. You will need a balancer puller

...crank shaft position sen. Is the knock sensor pluged up?What engine is this?If the knock sensor is o k ,and not bad,and it is pluged up,then the code is telling you that the timming chain is out of ...

...crank (but not start?) Question edited to what I think you meant to say? https://www.fixya.com/support/r29912554-changing_battery_not_create_problems and ...

...change. And it never stayed on permanently. We came home and turned the car off and it hasn't started since! I've replaced several parts since then. Here's the list: Distributor, Cap, Rotor, both ...

crank and run but sounds like starving for something, still missing. I have had 2 mechanics work on this car one says the air/fuel ratio and compression is good but not excepting fuel like out of sync

...crank sensor at the front under the front crank pulley and it is in the correct installed position, you should not have a code for that,unless the wiring is defective or the crank sensor is

...change the crank senor, cam sensor or fuel filter/regulator?? (this is for others who may be viewing this problem) P1594 = charging system voltage is too high P0320 = crankshaft position sensor ...

changed crank position sensor, new plugs,wires and coil,car will turn over but will not crank, however its a manuel transmission plugs.wires.coil,crank position sensor, head gaskets Check plugs wires

...off the front crank pulley. The pickup you changed is the Camshaft position sensor and will cause hard starting but not a complete no start. A picture of the Crankshaft position sensor is

...change the crank sensor without removeing the exhaust header and oil filter adapter Hi Michael, The link below is a short YouTube video showing how to find a crank shaft position sensor on a (1998 ...