1998 Pontiac Bonneville "vent door actuator located" Questions

Ad

why will not switch from vents to floor or defrost your problem is a mode door actuator located on the hvac case. they all go bad from time to time set a hvac code and system goes into default mode.

Ad

Question about Pontiac Bonneville

1 Answer

...vent flap modulator....ac is cold but flap is closed and wont let air flow into car interior..what is the real part name...the car is a still nice 98 pontiac bonneville that is very hot to drive in ...

Ad

Question about Pontiac Bonneville

1 Answer

...Grand Prix 2006 Vent Door Actuator Where is the Vent Door Actuator located on a Pontiac Grand Prix? How do I access it? You must remove the dash from the car to access the door and the

...door actuator Where is the blend door actuator located I can feel air out of the defrost vents but nothing from the vents on the console to get air to face. Generally,they will be located under the ...

...door actuator can direct airflow to the ducts that lead to the defrost vent, front vent, floor vent or a mix between. When a vehicle has dual climate control (where driver and passenger sides of the ...

...through defrost vents these trucks are equipped with an electric vent door motor known as a vent actuator. I believe the actuator that controls this vent is located behind the dash on the driver

...door actuator located and does dash have to come out on 02eclipse Yes the dash will have to be removed pending....There are more than one actuator...Some can be reached deep under the center of the ...

...door and not hard to locate, remove and replace. If it's the heating and A/C actuator you need to determine if it's for center vents, heater control, outside vent air or defrost. Once you determine ...

...vent door actuator location 2007 expedition), once you locate it start vehicle. Observe the white circle on actuator. With each vent selection it should turn. If it doesn't respond to each position ...

door actuator.  This controls air flow from defrost, vent, floot etc.  In most cases, replacing the blend door actuator will fix your problem.  It's commonly located above or behind

Not finding what you are looking for?
1998 Pontiac Bonneville Logo

762 questions posted

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...