...torque specs and sequence of both intake manifold and plastic plenum on 98 pontiac bonneville 3.8 non turbo Lower intake bolts 11 ft. lbs start in the center of the intake and work your way out cross ...
...torque specs Intake torque specs ' FordForumsOnline.com www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain May 7, 2010 - 2 posts - ?2 authors ISO torque specs for the intake & ...
...intake manifold bolt torque sequence on a 98 oldsmobile intruige When torqueing bolts on manifolds or heads you always start in the middle or center and torque in a circle motion and olny torque 1 ...
Torque specs for 98 Plymouth voyager 3.0 intake manifold torque spec is 20 -28 ft pound.here is the sequence.thankyou.ramundoo
Question about Pontiac Bonneville
torque specs on intake plenum and fuel rail on a 98 ford Ranger with a 4.0l Hi the torque spec for this fuel rail/manifold is 9-11lb/ft. Here is pic of the sequence.
Question about Pontiac Bonneville
I need a picture of the upper intake manifold torque sequence for a 98 yukon, 5.7 liter engine My manual is only showing lower intake specs Have you checked the Haynes manual ?
torque specs 98 ford f250 5.4 intake manifold lower
Question about Pontiac Bonneville
...intake plenum. I just changed one on my fiance's 98 monte. The egr line runs through it and warps the plastic allowing the coolant to leak. A replacement part costs around $130, and comes with the ...
Question about Ford Cars & Trucks
...torque specs in there for reference all the bolts must be clean and lubricated for the true torque value to be achieved if your using new ones just grease them with antiseize and tighten I feel that ...
762 questions posted
Usually answered in minutes!
547 Questions
496 Questions
432 Questions
391 Questions
329 Questions