heater blower motor? Can't get past fuse panel. 1998 ATC Jeep Grand Cherokee Blower Resistor connector ... ? 0:55 www.youtube.com/watch?v=sDFLuenx9aw Nov 14, 2012 - Uploaded by Freedomautomotive1 1998
blower housing to heater core housing retaining strap, then disconnect heater control cable. Pry retaining clip from rear of blower housing flange, then remove the three retaining screws. Working from
...heater-AC housing. 5. Remove the blower motor resistor or controller from the heater AC housing. INSTALLATION 1. Install the blower motor resistor or controller to the heater AC housing. The housing ...
...blower motor is located under the dash on the passenger side of the dash.a bracket with 1 screw and 3 other screws hold the motor in the heater box. remove them amd the electrical connector and the ...
...heater moter For 4.0L, inside the engine compartment, on the passenger side firewall, remove the coolant overflow bottle retaining strap remove the coolant overflow bottle and bracket. Unplug the ...
...Heater Blower Motor the blower motor is under panel near glove box. remove connector then the 3 mounting screws that hold it in. if changing the motor, use old fan cage from blower to new one, remove ...
...blower motor resistor. find it in or near the heater box by your blower motor should have 3 wires going to it remove the connector remove the resistor and replace it, that should solve your ...
heater core hoses. Disconnect damper door control cables. Disconnect blower motor electrical connector. Disconnect water drain hose and defroster hose. Remove nuts retaining heater housing assembly to
...Heater housing. Disconnect blower cooling hose. Remove blower connector from retainer and unplug the connector. Remove the 3 blower motor screws and remove blower motor. Reverse procedure to
812 questions posted
Usually answered in minutes!
496 Questions
481 Questions
432 Questions
391 Questions
329 Questions
