1987 Pontiac Fiero "cylinder" Questions

...The Pontiac Fiero was made from 1984 to 1988 In the 84 thru 88 Fiero's they had the 2.5L In-Line 4-Cylinder or the 2.8L V6. I have included both below For the 2.5L In-Line 4-Cylinder: Firing Order:

My 86 Fiero SE clutch master cylinder is weeping My 86 Fiero SE clutch master cylinder is weeping out the back where the shaft from the clutch goes through the boot. Replace it. Not a difficult job. ...

...dec 2008 I would like to know where i could get the adjustable clutch master rod between the master cylinder and the clutch pedal. He mentioned it could be purchased on line but did not say where. My ...

...Look at the air cleaner and find the big hose that goes to the throttle body. The clutch slave cylinder is an inch or two right below the air cleaner side of the giant hose. There is a heat ...

How do I fix a leak from the master cylinder to the slave cylinder on a standard car? No quick fixes for this one. You have to replace the line. u could run a new piece of copper pipe between the two

i need the cilinder order and the firing order for a 1986 2.8 pontiac fiero v6 The firing order for this car from right to left is:- 4 Cylinder is 1-3-4-2. and V6 or 6 Cylinder is 1-3-6-2-5-4

how tofix leaking seal on the slave cylinder rebuild the cylinder of replace

...the firing order for an '86 fiero 2.8L V-6 The firing order for this car from right to left is:- 4 Cylinder is 1-3-4-2. and V6 or 6 Cylinder is 1-3-6-2-5-4. Good luck and thanks for using Fixya.

1987 fiero Unfortunately, you'll need a locksmith. Take your door apart and take out your door lock cylinder. Take the cylinder to a GM dealership or locksmith to have them cut you a key by code. This

i want to know how to tell if i need a new clutch as compared to a slave cylinder, car has only 99k, and i bought it as is, owner said it needs slave cylinder, how can i be sure???? Put the car in ...