2004 Nissan Sentra "remove license plate light" Questions

Ad

...There are 2 bulbs above the license plate, each under a plastic cover. The covers are held in with 2 screws each. Just unscrew and remove the plastic covers and you should be able to access the

Ad

...license plate because of its position gets a lot of dirt and water problems so i would go back and take another good look remove the bulbs again and see if you can clean the inside with a little sand ...

Ad

...license plate light fuse for a 2009 Nissan Sentra Remove pull handle from the inside of the hatch and start in the lower corners, gently pry the entire interior panel from the hatch. buy replacement ...

Question about Ford Cars & Trucks

1 Answer

...Remove the license plate light cover. Remove the license plate light cover retaining screws using a screwdriver. Remove the license plate light cover. Note: You may need to use a small screwdriver to ...

...remove the license plate lamp To Install: Install or connect the following: License plate lamp Lamp socket to the license plate lamp Electrical connector Luggage compartment lid trim panel License ...

...remove the 4 10mm bolts. To get to the license plate lights assembly, you can follow these steps: Open the rear compartment lid and locate the license plate light assembly inside the trunk lid. Above ...

LID LATCH.REMOVE THE LICENSE PLATE LIGHT HOUSING FROM THE TRUNK LID.REMOVE THE BULB SOCKET FROM THE LICENSE PLATE LIGHT HOUSING.TO REMOVE BULB FROM THE SOCKET SIMPLY PULL IT STRAIGHT OUT OF THE SOCKET

Question about Nissan Sentra

1 Answer

...The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and

...Remove the license plate light housing, and disconnect the 2P connector from the light. Remove the lens from the light, and then replace the bulb. Install the light in the reverse order of

...remove the license plate lamp assembly. Disconnect the harness electrical connector. To Install: Connect the harness electrical connector. Engage the retainers and install the license plate lamp ...

Not finding what you are looking for?
2004 Nissan Sentra Logo

1,025 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...