2004 Nissan Sentra "fuse controls cooling fan" Questions

...fuse or relay that controls it I'm not sure about the sentra, but I know that in my 1998 Eclipse, which has a dual cooling fan, one of the fans is a backup. You might want to make sure of that before ...

cooling fan not coming on. First I would check the coolant itself. If it looks rusty, or you have put any plain water in the system, it is probably weak and incorrect mixture. Flush and refill with 50

...controls the different speeds. This is usually located in the airflow from the fan to keep it cool, and is about $15. Usually one speed still work if this goes out. High should work. [Look under the ...

...fuse. The engine control module (ECM) controls the fan operation by grounding the cool fan relay control circuit. When the cool fan relay is energized, voltage is delivered to the cooling fan motor. ...

...fuse assembly in the cab If they prove ok then it is possible that the coolant temperature SENSOR is faulty and needs replacing don't confuse it with the temperature sender which operates the temp ...

...cooling fans stop working is it most likely my fan motor or my relay switch or most likely both I replace water pump n thermostat and my coolant fluid still over flows back over after themotor gets ...

...Cooling fan fuse # 47 20amp. underhood fuse / relay box 5.condenser fan fuse # 50 20amp in underhood fuse / relay box. Any one of these could cause them to not work, rather then just replacing parts ...

...fuse on the cooling fan motor supply voltage circuit to the right cooling fan. During high speed fan operation, both engine cooling fans have there own ground path. The result is a parallel circuit ...

...fuse on the cooling fan motor supply voltage circuit to the right cooling fan. During high speed fan operation, both engine cooling fans have there own ground path. The result is a parallel circuit ...

...fuse on the cooling fan motor supply voltage circuit to the right cooling fan. During high speed fan operation, both engine cooling fans have there own ground path. The result is a parallel circuit ...